Hello, Up for bid is a Hydraulic Roller Cam for an originally equip 302 85-94 Small Block Ford, and 1994-95 351W (exclude 351C). This is a stock billet regrind cam great for pro street/strip use, bracket racing, and excellent for a 347 or larger cubic inch set-up. This is one of the biggest cams I got with it having .555 of an inch lift, and a duration of .236 were talking about a lot of Cam for EFI. If you are not familiar with the regrind process, you could think of it as coping a key. You have the master template which provides the lobe profile for the slave product. In the picture below is a before, and after shot of a stock core cam compared to the new regrind Cam. The regrind is done by a company that has been serving many speed shops in my area for years, and will have no runs. You must use a harden distributor gear. The Cam will provide a very lopey idle with good mid and high-end performance. Poor idle quality for mass air. The specs. and applications are as followed:

Grind Number # HR-288-FSB

Valve Setting:

IN./Hyd.

EX./Hyd.

RPM Operating Range:

2500 to 6000

Duration:

Advertised IN./288 EX./294

@.050" IN./236 EX./242

Valve Lift:

W/1.6 Rocker: IN./.555 EX./.574

*W/1.7 Rocker: IN./.590 EX./.612

Lobe Sep. Angle: 112

Applications: 9:1 CR, Intake, Headers,
3000 Stall or Manual, 3:73 Gears or lower.

Ford Grind List!!

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks). All international bidder email before bidding, and if win pay all customs tax associated with the item when received. The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!!

If you have any question please e-mail me before bidding at utilitycomponents@yahoo.com Thanks!!

*Whenever you change to a higher rocker arm ratio be sure to check valve to piston clearance as always.

!!My disclaimer: This cam is a regrind, and is not to be assumed as a part of any corporation or as such!!

***!! I have Cams for the following applications!!***;

Chevrolet

454 Big Block: Hyd. & HR ( very rare so when you see and need it… get it!)

350 Small Block: Hyd. & HR

4.3 V6: Hyd. & HR

2.8 V6: Hyd. & HR

250 Inline 6: Hyd.

300 Inline 6: Hyd.

Ford

352 - 428 Big Block: Hyd.

351 Small Block: Hyd. & HR

302 Small Block: Hyd. & HR

3.8 V6: HR

200 Inline 6: Hyd.

Dodge

318 - 340 Small Block: Hyd. & HR

3.9 Dodge: HR

Buick

215 - 350 Small Block: Hyd.

231 Grand Nation V6: HR

Pontiac

301 Small Block: Hyd.

Oldsmobile

350 Small Block: Hyd. & HR

Cadillac

4.1 Hyd. & HR

Ford Grind List!!

****Cores on Blocks, Heads, Cranks, and More Good Prices... Pickup's Only!!****